Table of Contents
Advertisement
Hardware Installation
Rear Panel
100FX Fiber Module
100FX Fiber Module
100FX Fiber Module
100BASE-FX Fiber Optic
Plug-in Module
(optional)
Fig. 2. Hub Rear Panels with Stacking Cables
Power Switch
The power switch toggles power on and off to the unit. The switch can also be
used to reset the Fast EtheRx hub.
AC Power Connector
The Fast EtheRx hubs use an auto-sensing 100VAC-240VAC, 50/60Hz
internal power supply. Connect the AC power cord from the rear of the unit to
an AC electrical outlet.
WARNING: For safety reasons, DO NOT attempt to open and
service the unit.
inside.
Fan Units
The Fast EtheRx hubs use two independent cooling fans for optimum air flow
to safeguard the unit from unnecessary heat exposure.
100FX Fiber Module (Optional)
Kingston offers an optional plug-in module to support 100BASE-FX Fiber
Optic cabling. There are two models to support both Straight-Tip (ST) and
Subscriber Connect (SC) type connectors:
• KNE100TX/RST
KNE24TX/RS User's Guide - Rev. A01
OUT
IN
Stackable Module
OUT
IN
Stackable Module
OUT
IN
Stackable Module
Stacking Ports
Dual Fan Units
There are no user-serviceable components
for ST connectors
Kingston Technology Company
9
PWR
100-240VAC / 50-60Hz 2.0A Max
PWR
100-240VAC / 50-60Hz 2.0A Max
PWR
100-240VAC / 50-60Hz 2.0A Max
AC Power
Power
Switch
Connector
Advertisement
Table of Contents
