Axis 5400 User Manual page 149

Appendix C: Technical Specifications AXIS 5400 User's Manual
148
SNMP-MIB II compliant (over UDP/IP and IPX), host resource MIB
Network Management
compliant (over UDP/IP and IPX), private enterprise MIB included. LAN
Network Manager for OS/2. Print server status in NWAdmin/PCONSOLE.
32 bit 100 MHz RISC Controller, 1 Mbyte Flash memory. 512 kbytes RAM.
Hardware
Logical Connection NWay support to provide auto-detection of the network speed. Running
simultaneously any combination of the supported protocols. Use of
IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types simultaneously.
RJ-45 connector (Category 5 Unshielded Twisted Pair) for 10baseT Ethernet
Attachments
and 100baseTX Fast Ethernet.
Security
Root password. User access list and printer access.
UNIX:
Encrypted passwords.
NetWare:
The logical printer ports can be programmed to perform auto ASCII to
Logical Printers
PostScript conversion, string before and after job, string substitution and
character set conversion.
One IEEE 1284 compliant high-speed parallel port, 36-pin Centronics
Parallel Printer
connector. Sustained throughput over 1 Mbyte/s using NetWare. Bi-
directional support for Apple, Reverse Telnet, PROS. ECP support.
2 LED indicators: Power and Network.
Front Panel
Test button for information printouts.