Using Hp Administration Tools - Axis 5400 User Manual

AXIS 5400 User's Manual

Using HP Administration Tools

Notes:
The AXIS 5400 is fully compatible with the HP JetAdmin and the HP
Web JetAdmin printer management software. You can use either tool
to install and configure your printer devices, and to monitor the
current status of your AXIS 5400 and the connected printers.
Please refer to the appropriate Hewlett Packard documentation for
further details about these tools.
To enable support for the HP JetAdmin and the HP Web
JetAdmin management software, you must set the
HP_JETADMIN parameter to YES.
It is not possible to upgrade the AXIS 5400 Flash Memory from
the HP JetAdmin.
If the AXIS 5400 has been configured with HP JetAdmin or HP
Web JetAdmin, you cannot configure it with AXIS NetPilot
unless you first reset it to the factory default settings.
Section 9: Management & Configuration
123