Assigning An Ip Address - Axis 5400 User Manual

AXIS 5400 User's Manual

Assigning an IP address

Before you start
System privileges
Ethernet address
IP address
Important:
To establish communication with the TCP/IP network, enabling
TCP/IP printing and Web browser management, an IP address must
be assigned to your AXIS 5400.
You need root privileges on your UNIX system, or administrator
privileges on a Windows NT server to set the IP address using RARP,
BOOTP or DHCP.
You need to know the Ethernet address of your AXIS 5400 to perform
the installation. The Ethernet address is based upon the serial number
of your AXIS 5400. This means, for example, that an AXIS 5400 with
the serial number of 00408C100086, will have the corresponding
Ethernet address of 00 40 8C 10 00 86. The serial number is located
on the bottom label of the unit.
Unless you are downloading the IP address using DHCP, you must
obtain an unused IP address from your network administrator.
DO NOT use the IP addresses used in the following examples
when installing your AXIS 5400. Always consult your network
administrator before assigning an IP address to your AXIS 5400.
Section 3: Basic Installation
25