Axis 5400 User Manual page 82

AXIS 5400 User's Manual
Note:
6. Write a text file containing the parameters you want to set:
BINARY_TYPE_1.
INT_ADDR.
ATYPE_1.
Parameters that you do not want to set should be excluded from
the text file.
Refer to B - The Parameter List, on page 139, for information
about which values that are valid for each parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for
printing documents.
9. Close the Chooser.
The _CFG port disappears 60 minutes after the AXIS 5400 has
been powered on. If you want it to reappear, you must restart
your AXIS 5400.
Section 7: Setting Up - Macintosh
:BCP
:192.168.3.191
:EPSONLQ2
81