Printing From Windows Nt 3.5 (Netbios/Netbeui) - Axis 16852 User Manual

Axis officebasic print server
Table of Contents

Advertisement

User's Manual
Section 5
Before you begin
Section 5: Printing from Windows NT 3.5 (NetBIOS/NetBEUI)
Printing from Windows NT 3.5
(NetBIOS/NetBEUI)
This section describes how to install the AXIS OfficeBasic for
NetBIOS/NetBEUI printing on Windows NT 3.5x clients.
Make sure that the NetBIOS/NetBEUI protocol is enabled on
your Windows client.
Physically connect the AXIS OfficeBasic to your network and
assign an ip address to the print server. See Hardware
Installation and IP address assignment, on page 12.
Installing the AXIS Print Monitor software on your client.
Please refer to page 38.
Installing the NetBIOS/NetBEUI printer ports on your client.
Please refer to page 40.
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officebasic

Table of Contents