Installing Tcp/Ip Printer Ports - Axis 16852 User Manual

User's Manual

Installing TCP/IP Printer Ports

Important!
Section 4: Printing from Windows NT 3.5 (TCP/IP)
Follow the instructions below to integrate the AXIS OfficeBasic in
your network and to install TCP/IP printer ports on your Windows
NT 3.5x clients:
If you have already assigned an IP address to your AXIS
OfficeBasic, proceed with step 6 in the instructions below.
1. Start AXIS IP Installer.
2. Click the serial number of your AXIS OfficeBasic when it
appears in the server list. Restart the AXIS OfficeBasic, if it
does not show up in the server list.
3. Enter an unused IP address in the designated IP address field
and click the Set IP address button.
4. The IP setting process will take approximately 10 to 40
seconds. Click OK in the confirmation box that appears when
the IP address has been set.
5. Close the AXIS IP Installer.
6. Open the Windows NT 3.5x Print Manager and select Create
Printer from the Printer menu.
7. Enter an appropriate name in the Printer Name field.
8. Select Other... in the driver list. Insert the printer driver
diskette/CD that was provided with your printer, select the
diskette/CD drive and click OK.
9. Select the printer driver you want to install.
10. Select Other... from the "Print to" drop-down list.
11. Select AXIS Port from the list of available Print Monitors in
the Print Destination dialog. Click OK.
12. Select LPR (TCP/IP) as your choice of network protocol and
click OK.
35