Monitor - Axis 16852 User Manual

User's Manual
Adding Printers in Windows 95/98 over TCP/IP using AXIS Print Monitor
AXIS Print Monitor
AXIS Print Monitor
Overview
Printing Environments
Peer-to-Peer Printing
Client/Server Printing
Note:
Section 3: Printing from Windows 95/98/NT4/2000/XP
AXIS Print Monitor is the recommended tool to use for network
printing in Windows 95/98 environments.
AXIS Print Monitor is available free of charge on www.axis.com.
AXIS Print Monitor allows a print server to be connected in the same
simple fashion as connecting a local printer. Once installed, it is
automatically initialized upon system startup. AXIS Print Monitor has
been developed for peer-to-peer printing, allowing your print jobs to
be sent directly to the print server.
AXIS Print Monitor supports printing over NetBIOS/NetBEUI and
TCP/IP (LPR and Raw TCP). To enable printing in these environments,
please ensure that the desired printing protocols are running on your
client.
The AXIS Print Monitor needs to be installed on each workstation to
perform peer-to-peer printing. Once installed, the AXIS Print Monitor
allows you to access all network printers, just as if they were
connected directly to your workstation.
AXIS Print Monitor needs only to be installed on one server to
perform client/server printing. The installed printers must be
configured to be shared to allow clients to use them. Pop-up
messages should not be enabled on the server as they will not be
displayed on the client platforms.
AXIS Print Monitor can also be used for DOS printing. Please
refer to the AXIS Print Monitor's Readme file for instructions. The
Readme file is located in the same folder where AXIS Print
Monitor is installed on your PC.
27