Installing Netbios/Netbeui Printer Ports - Axis 16852 User Manual

Section 5: Printing from Windows NT 3.5 (NetBIOS/NetBEUI)
40

Installing NetBIOS/NetBEUI Printer Ports

Follow the procedure below to install Axis printer ports from a
Windows NT 3.5x workstation:
1. Open the Print Manager and select Create Printer from the
Printer menu.
2. Enter an appropriate name in the Printer Name field.
3. Select Other... in the driver list. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click OK.
4. Select the printer driver you want to install.
5. Select Other... in the "Print to" list box.
6. Select Axis Port from the list of available Print Monitors and
click OK.
7. Select the AXIS Port you wish to add and then click OK. The
port appears as <name>.LP1, where <name> is AX followed by
the last six digits of the AXIS OfficeBasic serial number, e.g.
AX100086.
8. Click on Settings. Choose whether error condition pop-up
messages are to be displayed by checking the box in the
Configure Axis Ports dialog. Click OK.
9. Click OK.
User's Manual