Adding Netbios/Netbeui Printers In Windows Nt Using Axis Print Monitor - Axis OfficeBasic USB User Manual

Adding NetBIOS/NetBEUI Printers in Windows NT using AXIS Print Monitor

AXIS OfficeBasic USB
AXIS OfficeBasic
Parallel
Note:
AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User's Manual
See to it that the NetBEUI protocol is installed on your client. Follow the
procedure below to install Axis Printer Ports from a Windows NT
workstation:
1. Install AXIS Print Monitor on all workstations that will print via the Axis
print server. AXIS Print Monitor is available free of charge on
www.axis.com
2. To start the Add Printer Wizard, select Settings | Printers from the Start
menu and double-click the Add Printer icon.
3. The Wizard asks you to select My Computer or Network printer server.
Select My Computer, click Next.
4. Click Add Port... In the Available Ports dialog, select AXIS Port and click New
Port...
5. Select NetBIOS/NetBEUI as your choice of network protocol and click OK.
6. Select the AXIS Port you want to add from the list of available ports. The
port appears as <name>.<port>:
US1 Example: AX1000086.US1
LP1 Example: AX1000086.LP1
Click OK.
7. Close the Printer Ports window.
8. Click the Configure Port... button. Choose whether error condition pop-up
messages are to be displayed by checking the box in the Configure Axis Ports
dialog. Define the frequency at which the error messages should be
displayed after retry. Click OK. Continue the installation by clicking Next.
9. Choose the appropriate printer driver for your printer. Click Next and
proceed directly to step 11. It is only necessary to perform steps 9 - 10 if
your printer does not appear in the list.
Even if the desired printer is available in the Manufacturers and Printers
lists, you are advised to use the printer driver provided with the printer. This
assures you of the latest driver software.
10. Click Have Disk... Insert the printer driver diskette/CD that was provided
with your printer, select the appropriate diskette/CD drive and click OK.
11. Select the printer driver you want to install and click Next.
12. Enter an appropriate name for your printer and click Next.
13. Choose whether you want to share the printer with other network users and
click Next.
14. Choose whether you want to print a test page and then click Finish.
Adding Printers in Windows
29