Fitting And Removal Of Base - Iiyama ProLite B2776HDS User Manual

FITTING AND REMOVAL OF BASE

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
Use 'thumb screw' provided to secure base to monitor column.
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
<Stopper pin>
Please stand the monitor and then remove the stopper
pin on the back of the stand slowly while pushing top
face of the stand before you install the monitor. Careful
attention is required as the monitor is sprung loaded
and may expand quickly when removing it.
Thumb screw for Stand-Base fi xing
Stand-Base
BEFORE YOU OPERATE THE MONITOR 5
Stopper pin