Computer Setting; Adjusting The Height And The Viewing Angle; Panel Rotation - Iiyama ProLite B2776HDS User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 23: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
110mm, angle up to 170 degrees right and left,
24 degrees upward, 4 degrees downward.
 In order to ensure a healthy and relaxed body
position when using the monitor at visual display
workstations, it is recommended that the adjusted
tilt angle should not exceed 10 degrees. Adjust
the monitor's angle to your own preference.
 Do not touch the LCD screen when you
NOTE
change the height or the angle. It may
cause damage or break the LCD screen.
 Careful attention is required not to
catch your fi ngers or hands when you
change the height or the angle.
 Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.

PANEL ROTATION

A Adjust the mother's height.
B Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
 Attempting to rotate without fully extending
NOTE
upward may cause damage to stand.
 Video card for portrait display will be required
for rotating the image on the screen.
C Adjust the monitor's angle to your preference.
8 BEFORE YOU OPERATE THE MONITOR
Monitor
Stand
90°
30°
110mm