When These Problems Occur; All-Reset Function - Citizen C45 Instruction Manual

7. When These Problems Occur

<The Watch Shows Abnormal Display>
When the battery life is close to expiring, the display or functions may become
abnormal. When these problems occur, replace the battery as soon as possible. In
rare cases, a strong impact etc. may cause the display or functions to become
abnormal (no display, alarm sounds incessantly etc.). In this case, perform the all-
reset operation by referring to "8. All-Reset Function".
<Following Battery Replacement>
After the battery has been replaced, perform the all-reset operation by referring to

"8. All-Reset Function".

22
8. All-Reset Function
(1) Pull the crown out.
(2) Press the three buttons (A), (B) and (M) simultaneously. (While pressed, there
will be no display.)
(3) Release the buttons. (All the display segments will appear.)
(4) Push the crown in. (At this point, a monitor sound is heard.)
This completes the all-reset operation. Set each mode correctly before using the
watch.
(M)
MODE
TME
SELECT
SPLIT
RESET
(B)
60
AM PM
Crown
S.T.
SPLIT
CAL ALM CHR TMR
LIGHT
10bar
W.R.
START
STOP
SET
(A)
30
23