Citizen C45 Abbreviated Instruction

English
• To see details of specifications and operations, refer to the instruction manual:
Component identification
Hour hand
Button
M
Mode indication
Button
B
Second hand
• Actual appearance may differ from the illustration.
Using EL lights
The EL lights are turned on in the cases below:
• When pressing button while the crown is pushed in and the mode is [TME]
A
or [CAL].
• When pressing button or
A B
chronograph.
• When pressing button while using the timer.
B
Setting the time
Setting the time of the analog section
1.
Pull out the crown when the second hand points 0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
C45* Abbreviated instruction
Crown
Button
during time measurement using the
C45* instruction manual
Setting the time of the digital section
• Press button
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
Minute hand
1.
Press and release the upper left button
the mode to [TME].
Digital display
2.
Press and hold the lower left button
[S.T.] and [ON] or [OF] (off) starts blinking and the time becomes adjustable.
• The blinking part is the target to adjust.
3.
Press and release the lower left button
the target to be set.
• Each time you press button
A
Normal time
indication
TME
TME
12/24-hour basis
4.
Press and release the lower right button
• Press button
second.
• Pressing and holding button
setting the minute and the hour.
• "A" or "P" is displayed to indicate AM or PM in 12-hour basis indication.
5.
Repeat steps 3 and 4 to set other targets.
6.
Press and release the upper left button
procedure.
to cancel setting of the time of the digital section.
M
, the target changes as follows:
B
Summer time
AM
S.T.
TME
AM
TME
Hour
in accordance with a reliable time source when setting the
A
changes indication continuously when
A
repeatedly to change
M
for about 2 seconds.
B
repeatedly to change
B
Second
AM
TME
AM
TME
Minute
to adjust the target.
A
to finish the
M