Citizen C470 Abbreviated Instruction

English
• To see details of specifications and operations, refer to the instruction manual:
Component identification
Mode indication
Button
M
Hour hand
Second hand
Button
B
• Actual appearance may differ from the illustration.
Using EL lights
The EL lights are turned on when you press button
in and the mode is [TME], [CAL] or [SET].
Setting the time
Setting the time of the analog section
1.
Pull out the crown when the second hand points 0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
C470/C471 Abbreviated instruction
Minute hand
Crown
Digital display
Button
A
while the crown is pushed
A
C470/C471 instruction manual
Setting the time of the digital section
• Press button to cancel setting of the time of the digital section.
M
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button
the mode to [TME].
2.
Press and release the lower left button
indicate an area name you want on the digital display.
• For area names, refer to the table on "Using the world time".
• Pressing and releasing button
change the area name indication.
3.
Press and hold the lower left button
[S.T.] and [ON] or [OF] (off) starts blinking and the time becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the lower left button
the target to be set.
• Each time you press button
Normal time
indication Summer time
12/24-hour basis Hour
5.
Press and release the lower right button
• Press button in accordance with a reliable time source when setting the
A
second.
• Pressing and holding button
setting the minute and the hour.
• "A" or "P" is displayed to indicate AM or PM in 12-hour basis indication.
6.
Repeat steps 4 and 5 to set other targets.
7.
Press and release the upper left button
procedure.
repeatedly to change
M
repeatedly to
B
while Pressing and holding button
A
for about 1 second.
B
repeatedly to change
B
, the target changes as follows:
B
Second
Minute
to adjust the target.
A
changes indication continuously when
A
to finish the
M
also
B