When Pairing Fails - Citizen YF05 Instruction Manual

4
Make an account.
• Proceed to authentication process when you made an account. An authentication
number will be sent to the mail address you entered here.
• Tap [LOG IN] if you had logged out without executing pairing after making an
account before.
• Once signed up, the status (login status) is kept regardless whether the app is
activated or deactivated.
5
Press the right middle button
as the [Start Pairing] screen is shown.
6
Tap [THIS IS MY WATCH].
• The watch displayed on the screen may look different from the actual one you use.
• Tap [I DON'T SEE MY WATCH] when not only its color but whole appearance
looks different from yours.
• When update of the watch has started, wait until it is finished.
and tap [CONTINUE] on the screen of the app
B
7
Press and hold the upper right button
Pairing starts.
To start pairing on the screen of the app
Tap the watch icon ( ) on the upper right of the home screen, swipe left on the
[CHOOSE DEVICE] screen and tap [ADD NEW WATCH].

When pairing fails

When pairing fails and the target watch does not appear on the dedicated app, try
pairing again following the steps below.
1
Remove "Citizen Connected HR" on Bluetooth® setting of your smartphone.
2
Turn off the Bluetooth function on your smartphone and turn it on again.
3
Execute pairing between the watch and the smartphone again.
YF05 instruction manual
of the watch within time limit.
C
3/14