Citizen C460 Abbreviated Instruction

English
• To see details of specifications and operations, refer to the instruction manual:
Component identification
Digital display 1
Button
M
Hour hand
Mode indication
Second hand
Button B
• Actual appearance may differ from the illustration.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)
Using EL lights
The EL lights are turned on when you press button
in and the mode is [TME], [CAL] or [SET].
• The lights are also turned on when pressing button
measurement using the chronograph.
Setting the time
Setting the time of the analog section
1.
Pull out the crown when the second hand points 0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
C460 Abbreviated instruction
Minute hand
Crown
Digital display 2
Button
A
while the crown is pushed
A
or during time
A B
C460 instruction manual
Setting the time of the digital section
• Press button to cancel setting of the time of the digital section.
M
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button
the mode to [TME].
2.
Press and release the lower left button
indicate an area name you want on the digital display 2.
• For area names, refer to the table on "Using the world time".
• Pressing and releasing button
change the area name indication.
3.
Press and hold the lower left button
[S.T.] and [ON] or [OFF] starts blinking and the time becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the lower left button
the target to be set.
• Each time you press button
Normal time
indication
12/24-hour basis
5.
Press and release the lower right button
• Press button in accordance with a reliable time source when setting the
A
second.
• Pressing and holding button
setting the minute and the hour.
• "A" or "P" is displayed to indicate AM or PM in 12-hour basis indication.
6.
Repeat steps 4 and 5 to set other targets.
7.
Press and release the upper left button
procedure.
repeatedly to change
M
repeatedly to
B
while Pressing and holding button
A
for about 2 seconds.
B
repeatedly to change
B
, the target changes as follows:
B
Summer time Second
Hour Minute
to adjust the target.
A
changes indication continuously when
A
to finish the
M
also
B