34
Cleaning and Care
Changing the length of time for the pyrolytic cleaning
1. Proceed as described in the section "Pyrolytic cleaning".
2. As long as Duration
:
" / 2:15" or "3:15"
Duration
Pyrolytic cleaning then starts.
If Duration
form the setting procedure.
Changing the switch-off time for the pyrolytic cleaning
The switch-off timecan be delayed using the clock function End
of the pyrolytic cleaning starting).
When the different processes for pyrolytic cleaning are set:
P2 - 2:15 = Pyroluxe easy: For a light degree of soiling,
P1 - 3:15 = Pyroluxe intensive: For a high degree of soiling.
Shelf Support Rails
The shelf support rails on the left and right hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back (2).
is flashing, select the desired length for the process using
flashes for approx. 5 seconds.
is no longer flashing, press the Selection
button again and then per-
(within 2 minutes
or