Set The Water Softener - Electrolux ESI 47020 User Manual

Electrolux dishwasher
Table of Contents

Advertisement

• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in

Set the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
Water hardness
°dH
51 - 70
91 - 125
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
°TH
mmol/l
9,1 - 12,5
76 - 90
7,6 - 9,0
65 - 75
6,5 - 7,5
51 - 64
5,1 - 6,4
40 - 50
4,0 - 5,0
33 - 39
3,3 - 3,9
26 - 32
2,6 - 3,2
19 - 25
1,9 - 2,5
7 - 18
0,7 - 1,8
< 7
< 0,7
1' etc. set the multitab function. (Re-
fer to 'Multitab function').
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
Adjusting the water hardness setting
manually
2
2
2
2
2
2
1
1
1
1
Setting electronically
The appliance is factory set at level 5.
1. Switch on the appliance. It must be in
setting mode.
2. Press and hold, at the same time, the
function buttons B and C. The pro-
gramme indicator lights above function
buttons A, B and C start flashing.
3. Press function button A, the programme
indicator lights above the function but-
tons B and C go off. The programme in-
dicator light above function button A con-
tinues to flash. The digital display shows
the current level.
Examples:
Digital display shows
Digital display shows
4. To change the level, press function but-
ton A. Each time the button is pressed the
electrolux 7
Use of
electronically
level 10
level 9
level 8
level 7
level 6
level 5
level 4
level 3
level 2
level 1
= level 5
= level 10
salt
yes
yes
yes
yes
yes
yes
yes
yes
yes
no

Advertisement

Table of Contents
loading

Table of Contents