View Timers And Odometer Readings - Rand McNally intelliroute TND 500 User Manual

Timers Window
Location Route Options Window
Timer Reset Window
Rand McNally IntelliRoute ® TND TM 500 User's Guide
Timers and Logs

View Timers and Odometer Readings

Main Menu
From the :
Truck Tools > Timers and Logs > Timers
1 Tap
Timers Tab
The displays.
To reset a timer, tap on the timer.
2
Timer Reset Window
The
Change To
On the left, use the
hours. The mileage/hours then continue to count down from the changed
value. This would be used occasionally if you need to make an adjustment
to the current value.
Reset
On the right, use the
normally 0. At the beginning of each day or run, tap Reset to set the value
back to zero.
3 To change the current reading, in the
MinusButton.bmp) and (TruckInfo_PlusButton.bmp) to specify the new
Change
setting, then tap
4 To reset the maximum settings, tap
Back
Tap to save changes.
5
.
displays.
field to make corrections to mileage or
field to set the most common reset value,
Change To
field, use (TruckInfo_
.
Reset
.
74