Turn The Device On; Turn The Device Off; Enter Or Return From Standby (Sleep) Mode; Reset The Device - Rand McNally intelliroute TND 500 User Manual

Reset Button
Rand McNally IntelliRoute ® TND TM
Power Key
500 User's Guide

Turn the Device On

• Press and hold the Power Key for two (2) seconds, then release.
(After 5-10 seconds, the Rand McNally splash screen displays as the device
powers on.)

Turn the Device Off

• Press and hold the Power Key for five (5) seconds, then release.
A message displays indicating that the device is powering off.

Enter or Return from Standby (Sleep) Mode

• Press and release the Power key.

Reset the Device

Resetting the device restores factory settings and restarts the device.
When you reset the device, your current route information is lost. Address Book
entries, trips, settings, ratings and messages to Rand McNally are not affected.
Note:
Use this procedure only when instructed to do so by Rand McNally
Customer Support Personnel.
• Use a paper clip to press the reset button located on the back of the
device case
14