Recording Program - Teac LCDV3257DVR User Manual

DVR Function
3. While in Time Shift mode, operations below can be used.

Recording program

After formatting the external USB storage device and making applicable changes to the settings on the DVR
File System menu, you can record a DTV program on the external USB storage device.
Select the desired program and press the record
1.
be displayed.
During recording, the progress bar will fade out in 10 seconds.
Press the
which will fade out in 10 seconds.
2. Recording stops when you press the
USB storage device automatically.
Press the ►PLAY button to start play on the recorded program.
3.
Recording in standby mode
This unit is able to record programs while in sleep mode.
Start a recording, then press the power button.
A message as shown on the right will be displayed.
Select Yes to record in standby mode.
While recording in standby mode, the unit will not output any picture or sound. The power indicator will
flash in blue and red consecutively while recording in standby mode.
Press the or
speed.
Press the button to jump about 30 seconds forward.
Press the button to jump about 30 seconds backward.
Press the button once to set the beginning point "A" and press the
button again to set the end point "B". Then, the segment A-B will be played
repeatedly. Press the
button again, and an icon
STOP button and the recorded file is stored in the external
button repeatedly to increases the fast forward/rewind
button to resume live TV program.
button to start recording. A progress bar will
will blink on the bottom right corner of the screen,
39