Ipod ® Playback; Basic Operation; Listening To Music - Denon AVC-A1HD Owner's Manual

iPod ® Playback
The music on an iPod can be played by using the Control Dock for
iPod (ASD-1R, sold separately).
The operation can also be performed using the buttons on the main
unit or remote control unit while watching the GUI menus.
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.

Basic Operation

1
Make the necessary preparations.
q S et the iPod in the DENON Control Dock for iPod.
(vSee the Control Dock for iPod's operating instructions.)
w A ssign the Control Dock for iPod's input.
:
"Source Select" – "(input source)" – "Assign"–
"iPod dock" (vpage 44)
2
<SOURCE SELECT>
Either turn or press
mode) to select the input source assigned in step 1-w
above.
OK to disconnect
(iPod screen)
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
:
"Source Select" – "(input source)" – "Play"
(vpage 43)
3
To operate using the main remote control unit, set the
remote control unit to the iPod mode.
(vpage 67 "Remote Control Unit Operations")
4
[SEARCH]
Press and hold it down for a 2 seconds or
more to select the display mode.
To switch between modes, press and hold down the button.
When remote mode is active, "Remote" is displayed.
[Display mode]
Display location
Audio file
Playable
files
Video file
Remote
control unit
Active
(AVC-A1HD)
buttons
iPod
z : V ideo may not be output, depending on the combination of ASD-
1R and iPod.
• With the default settings, the iPod can be used connected to the VCR
(iPod) connector.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound.
The default setting is "Mode3" .
[iPod]
(AMP
<ON/STANDBY>
• Press or
power to the standby mode before disconnecting the iPod. Also
switch the input source to one to which the GUI menu "iPod dock"
is not assigned before disconnecting the iPod.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
1
2
Browse mode Remote mode
Main unit display iPod display
S S
To pause
S z
A
During playback, press
Press again to resume playback.
S S
Fast-forwarding or fast-reversing
During playback, either press and hold
A S
fast-forward), or press
To cue to the beginning of a track
During playback, either press
cue to the next track), or press
To stop
During playback, either press and hold
Playing repeatedly
Press
[Selectable items] All One OFF
[POWER OFF]
and set the AVC-A1HD's

Listening to Music

Use ui to select the menu, then press
to select the music file to be played.
ENTER
Press or p .
Playback starts.
ENTER [1]
or .
u (to fast-reverse) or
[6] [7]
or .
u (to cue to the previous track) or
[8] [9]
or
ENTER
or press
[CHANNEL –] [REPEAT]
or on the sub remote control unit.
:
"Source Select" – "(input source)" –
"Playback Mode (iPod)" – "Repeat" (vpage 43)
ENTER
or p
i (to
i (to
.
[2]
.
55