Quick Select Name; Trigger Out 1; Trigger Out 2; Trigger Out 3 - Denon AVC-A1HD Owner's Manual

Operating from the main unit
b The GUI menu is not displayed when performing this setting.
AUDIO DELAY RETURN
q Press and hold the and
seconds.
"Video Format" appears on the display.
w Use the o p button to make the setting.
ENTER MENU RETURN
e Press the , or button to complete the
setting.
Text
Text information display.
[Selectable items] ON OFF
Master Volume
Master volume display during adjustment.
[Selectable items] ON OFF
NET/USB, iPod
This sets the time the on-screen display is displayed when an operation
is performed.
30s 10s
[Selectable items] Always
g Quick Select Name
Change "Quick Select" display name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
h Trigger Out 1
Select the conditions to turn on the trigger out 1 with respect to
the zone, input source, surround mode, HDMI monitor, etc.
buttons for at least 3
For details about the trigger out function, see page 22.
j Trigger Out 2
This sets the conditions to turn on the trigger out 2, in the same
way as "Trigger Out 1" above.
k Trigger Out 3
This sets the conditions to turn on the trigger out 3, in the same
way as "Trigger Out 1" above.
l Trigger Out 4
This sets the conditions to turn on the trigger out 4, in the same
way as "Trigger Out 1" above.
[Selectable items]
Setting with Respect to the Zone
When the power of the zone turned on/off, the trigger out turns on.
Setting with Respect to the Input Source
When the input source set to on is selected, the trigger out turns on.
OFF
Associated with respect to the input source for zones set to "ON" at
"Setting with Respect to the Zone" .
Setting with Respect to the Surround Mode
When the surround mode set to on is selected, the trigger out turns
on.
This is effective when the "MAIN ZONE" has been set to "ON" for
the "Setting with Respect to the Zone" and the input source which is
set to "ON" has been selected for the "Setting with Respect to the
Input Source" .
ON – – –
Setting with Respect to the Monitor
When the HDMI monitor set to on is selected, the trigger out turns
on.
This is effective when the "MAIN ZONE" has been set to "ON" for
the "Setting with Respect to the Zone" and the input source which is
set to "ON" has been selected for the "Setting with Respect to the
Input Source" .
A0 Transducer Setup
Settings when using transducer.
The Transducer Setup can be accessed through GUI menu "Speaker
Setup" - "Subwoofer Setup" is "1SP" , "2SP L/R" or "2SP MIX" . The
transducer signal is outputted from "SW3" .
Level
[Variable range]
–12dB ~ ~ +12dB
0dB
:
Set the transducer level.
OFF
:
Turn the transducer output off.
When you adjust "Level", the adjusted value is set for all surround
modes. To adjust the level for individual surround modes, use "Channel
Level" (vpage 65).
LPF
Set the upper limit of the low frequency output to the transducer.
[Selectable items]
40Hz 60Hz 80Hz 90Hz 100Hz
150Hz 200Hz 250Hz
110Hz 120Hz