Denon AVC-A1HD Owner's Manual page 66

[Example 2] Setup menu screen
Click to
determine a
Click "v" and select from
setting.
the displayed items.
After entering
characters, click "Set"
to set, or click "Def" to
return to initial setting.
Enter figures or click
"<" or ">" to make
the setting, and then
click "Set".
Click the menu from which you want to make
settings.
The display on the right becomes each setting
screen.
Click "SAVE" when you want to save settings, and click
"LOAD" when you want to call settings.
Becomes each operation screen.
[Example 3] Zone name change screen
Click "ON" when
performing Top Menu
Link Setup.
When set up, return to
the top menu from each
operation screen.
(Default setting : "OFF")
Click when
changing the
background
color of each
operation
screen.

[Example 4] PDA menu screen
Select to
operate each
zone.
NOTE
You cannot change setup menu operations and zone name on the
PDA menu screen.
[Example 5] Net Audio operating screen
Click the menu from which you want to
make settings.
Click when selecting menu.
Click to stop play.
Enter zone
name.
Click to set
zone name.
When registering presets, click "v" to
select the channel you want to register,
and then click "MEMORY".
Click to
Click "v" to select the preset channel you want
return to the
to play.
top menu.
When searching using an acronym, click "v" and select
from the displayed characters.
NOTE
• To perform web control, you must connect a web control device
such as a PC to the same network as the AVC-A1HD.
• With web control, some network settings, etc., cannot be set.
• When updating firmware, settings made by the web controller may
be reset.
Click to move up/down the menu
pages.
Click to repeat play.
Click to random play.
SOURCE SELECT
Surround mode
<ZONE2/3/4 / <PHONES>
REC SELECT>
[ AMP]
INPUT MODE
SOURCE
SELECT
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
INPUT MODE
Surround mode