Denon AVC-A1HD Owner's Manual page 39

U se uio p to input the "Key" (encryption key) and press
ENTER
.
Enter the same encryption key as used for the access point.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
When no security settings have been used in the Internet
connection settings, this step is not necessary.
r W hen encryption is by "WEP", select the "Default Key" using
i, and then press o p.
1 2 3
[Selectable items]
Select the same default key as used for the access point. This
should normally be set to "1".
t U se i to select "Connection" and press
Network connection starts.
When connection is established with the access point,
"Connection completed." is displayed.
AVC-A1HD performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 4.
n Manual settings
4
ENTER
.
r S elect the
encryption method.
Example) WEP
u Select "Connection".
q S elect "Detail" and press
w U se o p to select the Mode and press i.
[Selectable items]
Infrastructure : Select when communication is via an access
Ad-hoc
e U se uio p to input the name of the wireless network (SSID)
ENTER
and press
[Characters that can be input]
A ~ Z a ~ z
q Select "Detail".
w S elect the communication mode.
Example) Infrastructure
e Input the SSID.
t Enter encryption key.
y S et only
during "WEP"
in step r.
ENTER
.
point.
: Select during direct communication, when an
access point is not used.
.
0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
r U se ui to select the Security and press i.
[Selectable items]
None :
Select if not encrypted.
Can also be used even without encryption, through we
recommend encryption for improved security.
WEP WPA-PSK(TKIP) WPA-PSK(AES)
WPA2-PSK(AES) :
Select the encryption method according to the encryption setting
of the access point you are using.
t U se uio p to input the "Key" (encryption key) and press
ENTER
.
Enter the same encryption key as used for the access point.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
When no security settings have been used in the Internet
connection settings, this step is not necessary.
y W hen encryption is by "WEP", select the "Default Key" using
i, and then press o p.
1 2 3
[Selectable items]
Select the same default key as used for the access point. This
should normally be set to "1".
ENTER
u U se i to select "Connection" and press
Network connection starts.
When connection is established with the access point,
"Connection completed." is displayed.
AVC-A1HD performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 4.
WPA2-PSK(TKIP)
4
.