Installation - Teac LCDV3256HDR User Manual

Installation

DO NOT place containers with
liquids such as flower vases, soft
drink cans, or medicine bottles or
small metallic objects on top of
the unit.
• If liquid enters the unit or any
metal object falls into the unit, it
may result in ashort-circuit, fire,
or electric shock.
DO NOT place a burning candle,
burning anti-mosquito incense,
or lighted cigarette on top of the
unit. DO NOT place the unit near
any heat source such as a fire-
place or space heater.
• Doing so poses a serious risk
of overheating and a possible fire
outbreak.
Install the unit at an adequate
distance from the wall to ensure
sufficient ventilation.
Insufficient ventilation may result
in the unit overheating, which
may cause a possible fire
outbreak.
The following precautions are divided into "Warnings" and "Cautions".
Disconnect device: plug/coupler or all-pole mains switch location
Warning : Ignoring this precaution may result in death or serious injury.
Caution : Ignoring this precaution may result in injury or property damage.
DO NOT place the unit where
it is exposed to rain, excessive
moisture or grease.
• Doing so may result in fire,
electric shock, malfunction,
or deformation.
DO NOT place the unit in a poorly
poorly ventilated enclosure, such
as a cabinet.
• Doing so poses a serious risk
of overheating and a possible fire
outbreak.
Do not cover the unit with a
tablecloth, curtain, or other
material.
• Insufficient ventilation may
result in the unit overheating,
which may cause a possible
fire outbreak.
DO NOT use or store flammable
or combustible materials near
the unit.
• Doing so may result in fire
or explosion.
DO NOT run power cords near
heat-producing appliances such
as radiators, stoves, or irons.
• The excessive heat could melt
the insulation and expose live
wires, resulting in fire or electric
shock.
Be sure to place the unit on a
level surface.
2
Safety Precautions
DO NOT place the unit on an unstable
surface, such as a sloped table, or any
stand with a contact area smaller than
the bottom surface of the unit stand.
• Placing the unit on a flat stable surface
could prevent accidents from happening.
Ignoring this precaution could result in the
unit toppling over, causing injury to
individuals or animals.
Install the antenna away from
high-voltage power lines and
communication cables. Make sure
it is installed securely.
• If the antenna touches a power line,
contact with the antenna could result
in fire, electric shock, or serious injury.