Installation - Teac LCDV3253HD User Manual

Thank you very much for purchasing this TV.To enjoy from the very beginning,
read this manual carefully and keep it handy for easy reference.

INSTALLATION

Locate the TV in the room where light does not strike the screen
Total darkness or a reflection on the picture screen can cause eyestrain. Soft
and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet
or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to
a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls
not mentioned in this manual. All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or CABINET, the power cord should
be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna cord to prevent damage
to your TV. All repairs to this TV should only be performed by the TV service personnel.
INTRODUCTION
-5-
directly .