Table of Contents
Advertisement
68 electrolux
Combustion products
discharge
Gas cooking units must discharge
combustion products through hoods
directly connected to flues or outside.
Positioning
This appliance belongs to the class
"X". It has been designed to be placed
close to furniture units not exceeding
the height of the working level (EN 60
335-2-6)
Levelling
The appliance is provided with adjust-
able small feet placed in the back cor-
ners of the base.
By adjusting the small feet it is possible
to ensure a uniform distribution of the
liquids contained in pans or pots.
Gas connection
Gas connection must be carried out
according to the rules in force. The
manufacturing company release the
unit, once tested, adjusted for the kind
of gas stated on the rating plate located
on the back of the range, next to con-
nection pipe. Be sure that you are go-
ing to connect the unit to the same kind
of gas written on the plate.
Connection using a rigid pipe
or a flexible metal pipe
To ensure higher safety, it is recom-
mended to carry out the connection to
the gas system using rigid pipes (ex.
copper) or using flexible stainless steel
pipes, to avoid any stress to the unit.
Gas feeding pipe fitting is Gc 1/2.
For this type of installation, connec-
tion to the gas supply should be carried
out using only and exclusively flexible
metallic tubes in conformity with rules in
force.
YES
FLEXIBLE
RUBBER GAS
PIPELINE
ELECTRIC
WIRE
NO
FLEXIBLE RUBBER
GAS PIPELINE
E L E C T R I C
WIRE
Advertisement
Table of Contents
