Table of Contents
Advertisement
Handset Settings
1. Press Menu.
2. Scroll to Handset Set. Press OK.
3. Scroll to required function e.g. Language. Press OK.
4. Scroll to required setting. Press OK.
Ringer Set
Alarm Clock
Contrast
Wallpaper
Auto Answer
LED
Select Base
Handset Name The text shown on standby can be altered.
Language
Baby Monitor
Voice mail No.
Network
Register
Handset PIN
Default Set
English
The handset's ring signal and tones can be adjusted.
An activated alarm is indicated in standby mode by
When the alarm goes off, an audio signal is heard for 60
seconds. Press any key on the handset to turn off. The
volume is determined by the set ring signal level. If the
symbol is not illuminated in standby mode, the reason may
be that the clock is not set.
The contrast in the display can be adjusted to several
levels.
The background image in the display can be changed.
The handset answers incoming calls when it is lifted from
the base unit.
Select if handset ringer LED should flash or not when
ringing.
Only used in systems with more than one base unit.
Language setting is explained in Connection.
Cordless baby monitor, see separate description.
Programming of speed dial numbers. To call one of these,
press down the corresponding button
It is possible to change the codes for operator services (CF=Call
Forwarding).
To register a new handset, see separate description.
You can change the pin code (0000 on delivery).
Resetting the handset.
.
H
-
1
3.
Advertisement
Table of Contents
