Sound; Clock/Alarm; Other Settings - Doro TH70 Manual

Sound

1. Press Menu. Scroll to Sound. Press OK.
2. Scroll to desired function, e.g. Ringer. Press OK.
3. Scroll to desired function, e.g. Ring volume.
4. Scroll to desired setting
The handset's ring signal can be adjusted.
Ringer
Can be heard when pressing buttons/when charging starts, low battery,
Tones
confirmation or when out of range.

Clock/Alarm

1. Press Menu.
2. Scroll to Settings. Press OK.
3. Scroll to Clock/Alarm. Press OK.
4. Scroll to desired setting. Press OK.
The activated alarm is indicated with
Alarm
goes off, an audio signal is heard for 30 seconds. Use Stop to switch it
off permanently. The volume is determined by the set ringer level.
Setting of date/time is described in the Connection chapter.
Date/Time

Other settings

1. Press Menu.
2. Scroll to Settings. Press OK.
3. Scroll to HS settings. Press OK.
4. Scroll to required function e.g. Language. Press OK.
5. Scroll to desired setting. Press OK.
This function allows you to dial a predetermined number by pressing any
Direct call
button (however not Opt which allows you to disconnect this function).
Only used in systems with more than one base unit.
Select base
Setting the contrast and the text displayed in standby mode.
Display
Language settings are explained in the Connection chapter.
Language
Auto answer The handset answers incoming calls when it is lifted from the base unit.
To register a new handset, see separate description.
Register
To deregister a handset from a base unit. System PIN is 0000 on delivery.
De-Register
Handset reset Resetting the handset.
English
/ . Press OK.
8 9
0
on standby. When the alarm