Headlight & Taillight - Honda CRF250X Owner's Manual & Competition Handbook

Headlight & Taillight
Refer to Safety Precaution on page 2.
Headlight Bulb
1. Remove the two front visor bolts (1) and pull
out the front visor (2).
(1) front visor bolts
(2) front visor
2. Disconnect the headlight connector (3).
Remove the dust cover (4).
(3) headlight connector
(4) dust cover
100
Servicing Your Honda
3. To pull the headlight bulb out, push and turn
the socket (5) counterclockwise.
(1)
(2)
(5) headlight bulb socket
4. To install the headlight, reverse the removal
procedure.
Headlight Aim
The headlight beam can be raised or lowered.
Turn the adjusting screw (1) clockwise to move
the headlight up or turn the adjusting screw
(3)
counterclockwise to move the headlight down to
proper adjustment.
(4)
(1) adjusting screw
(5)
(1)
Taillight
The taillight uses LED illumination.
If the taillight does not function properly, see
your Honda dealer for service.
This model is equipped with an electric starter
and battery for easy engine starting.
There is a possibility of damage to the lighting
system if the battery is carelessly removed.
Never kick-start the engine without the battery
connected.
If it becomes necessary to kick-start the engine
with the battery removed, remove the relays to
the battery to prevent damage to the lighting.