Honda CRF250X Owner's Manual & Competition Handbook page 46

Subframe Upright Position
Installation
1. Loosely attach the lower ends of the subframe
(1) to the mainframe while connecting the air
cleaner connecting tube to the carburetor.
Then align the subframe with the rear wheel
and tighten the subframe mounting B bolts (2)
and subframe mounting A bolt (3) to the
specified torque:
B bolts: 22 lbf·ft (30 N·m, 3.1 kgf·m)
A bolt: 36 lbf·ft (49 N·m, 5.0 kgf·m)
(3)
(1) subframe
(2) subframe mounting B bolts
(3) subframe mounting A bolt
40
Servicing Your Honda
2. Tighten the screw (4) on the air cleaner
connecting tube clamp (5).
(1)
(4) screw
(5) air cleaner connecting tube clamp
3. Install the rear suspension upper mounting
bolt (6), nut (7) and band (8).
(2)
Tighten the rear suspension upper mounting
bolt to the specified torque:
32 lbf·ft (44 N·m, 4.5 kgf·m)
(8)
(6) rear suspension upper mounting bolt
(7) nut
(8) band
(5)
(4)
(7)
(6)
4. Install the muffler (page 63).
5. Install the seat (9) (page 36).
6. Install the left side cover (10), collars (11),
seat bolt (12), and left side cover bolt (13).
Close the air cleaner box cover (14) and turn
the quick fastener (15) clockwise.
(9)
(14)
(13)
(15)
(9) seat (13) left side cover bolt
(10) left side cover (14) air cleaner box cover
(11) collars (15) quick fastener
(12) seat bolt
7. Install the right side cover (16), collars (17),
seat bolt (18) and right side cover bolt (19).
(16)
(17)
(18)
(19)
(16) right side cover
(17) collars
(18) seat bolt
(19) right side cover bolt
(10)
(11)
(12)
(11)
(17)