Inserting the general purpose pan, grill, and tray
Inserting the general purpose pan and
tray:
The trays have a little bulge on the left and right
edges. These are provided as positioning guides
and must always be located towards the rear when
inserting the tray.
For grills:
Insert the tray at the desired position.
Inserting/Removing the Fat Filter
moving the Fat Filter
The fat filter protects the rear wall heating element
against splashes of fat when roasting.
Inserting the fat filter
Holding the fat filter by the tab, insert the two retain-
ers into the opening on the rear wall of the oven (fan
opening) from the top downwards.
Removing the fat filter
Take hold of the tab on the fat filter and remove by
pulling upwards.
12