Saving And Deleting Images - Wildview STC-TGL1 User Manual

Saving and Deleting images

SAVING IMAGES
To save images on to your PC, simply copy and past, or drag and
drop from the SDRAM memory to your PC desk top.
DELETING IMAGES
There are two ways to delete the images from the internal SDRAM
memory.
1. After you down load image into your desk top, you can delete
the image in the SDRAM while the USB cable is still connect.
2. Simply remove the battery from the battery compartment. This
will delete the image stored in the internal SDRAM memory
CAUTION:
Do no remove the battery until you have down loaded all the
images in the internal SDRAM. Once the battery is removed,
all images in the internal SDRAM will be deleted. (This does
not apply to images stored in SD card)
www.wildviewcam.com
STC-TGL1
Toll Free 888-304-6125
18