Saving And Deleting Images - Wildview InfraredXtreme STC-TGLX35IR User Manual

Saving and Deleting images

SAVING IMAGES
To save images on to your PC, simply copy and paste, or drag and
drop from the memory to your PC desk top. Please note, if you use an
SD card to save your images, the computer will display the images
stored on the SD card. If no SD card is used, then the computer will
display the images stored in the internal SDRAM.
DELETING IMAGES:
There are two ways to delete the images from the memory, internal
SDRAM or SD card, whichever you are using.
1. After you download the image onto your desk top, you can delete
the image by: Unplugging the USB Cable from camera. Slide the
power switch to PIR position. LCD screen will display the number
of images stored in the memory.
o
Delete One picture:
a. Press [SET] button to enter delete setting. Display will
show "ESC"
b. Press [UP] or [DN] to select d-ONE (delete one)
c. Press [SET] to delete the image. Press [UP] or [DN] until
www.wildviewcam.com
STC-TGLX35IR
Toll Free 888-304-6125
21