Receiving A Telephone Call; Call Alert - E.F. Johnson Company 5300 SERIES Operating Manual

Each time the PTT switch is released, a go-ahead
tone is sent to the landside party to indicate when
they can respond. To dial a number after the
connection is made, press the PTT switch and dial
the number using the microphone keypad (if
available).
•
If the selected telephone number is not valid,
"INVALID" is displayed and an alert tone sounds.
Select a valid number.
•
If the system is busy, "BUSY" is displayed and the
busy tone sounds. The call automatically proceeds
when the system becomes available.
•
If you are out-of-range or the radio cannot be
accessed for some reason, "NO PHONE" is
displayed and an alert tone sounds.
•
If the interconnect call you are making or the
selected secure mode is not authorized, "REJECT"
is displayed and an alert tone sounds.
•
If your radio does not have the proper encryption
key, "KEYFAIL" is displayed and the call must be
made in the clear mode by pressing the Clear/
Secure option key (if strapped to switchable).
Otherwise, load the correct key.
7. When the telephone call is finished or it could not be
completed for some reason, end it by pressing the
PHONE option switch and placing the microphone
back on-hook.

6.6.3 RECEIVING A TELEPHONE CALL

1. When a telephone call is received, "ringing" similar
to a standard telephone is heard and "PHONE" is
displayed.
2. To answer the call, press the PHONE option switch
and press the PTT switch to talk and release it to
listen (since the radio operates half duplex, it is not
possible to talk and listen at the same time).
3. When the call is finished, end it by pressing the
PHONE option switch and placing the microphone
back on-hook.
SMARTNET/SMARTZONE/P25 TRUNKED FEATURES

6.7 CALL ALERT

The Call Alert™ feature allows pages to be sent
and received. With SMARTNET/SmartZone opera-
tion, either the Enhanced Private Conversation™ or
Standard Private Conversation mode may be
programmed depending on the capabilities of the radio
system. With P25 Trunked operation, operation is
similar to the enhanced mode.
Answering a Page
1. When a page is received, five beeps sound and
"PAGE" is displayed. The ID of the mobile paging
you is stored as the last ID received.
2. To clear or ignore the page, press any option switch.
If the PTT switch is pressed, a group call is placed
on the selected channel.
3. To answer the page as a private or unit call (see
page 41), press the CALL (Private/Unit Call) option
switch and the tag (alias) of the mobile paging you
is displayed. Press the PTT switch and respond. One
of the conditions that follow may also occur:
Enhanced Private Conversation™ Mode
•
If the mobile being called is on the air, ringing is
heard until the called party answers or for 20
seconds, whichever occurs first. If no answer
occurs within 20 seconds, a continuous tone
sounds and "NO ANS" is displayed.
•
If the mobile being called is not on the air, a
continuous tone is heard instead of ringing and
"NO ACK" is displayed.
Standard Private Conversation Mode
•
If the mobile being called is not on the air or does
not answer, you will simply not hear a response.
4. When the call is finished or it could not be
completed for some reason, end it by pressing the
CALL option switch and placing the microphone
back on-hook.
44