E.F. Johnson Company 5300 SERIES Operating Manual page 12

Channel Number - Indicates the currently selected
channel (conventional) or talk group (other modes).
Status Display - These two characters indicate the
following status information:
- This symbol in the left position indicates that
the displayed channel is in the scan list
(scanned normally).
- A "P" in the left position indicates that the
selected conventional channel is a priority
channel (first priority with dual priority).
- A "2" in the left position indicates that the
selected conventional channel is a second
priority channel.
- This rotating clock-like symbol in the right
position indicates that scanning is enabled.
- Indicates that the scan list edit or keypad
programming mode is selected (see Section 4.12 or
Section 5.17).
- Indicates a telephone (interconnect) call has
been initiated.
- Indicates that voice encryption is enabled or that
an encrypted call is being received. This indication
flashes when an encrypted call is received on a digital
channel. Refer to Section 11.2.7 for more information.
MON - Indicates that the conventional monitor mode
is enabled by taking the microphone off-hook or
pressing the MON option switch. This disables
squelch control features so that all messages on the
channel are heard. Refer to Sections 5.2 and 5.3 for
more information. The radio can also be programmed
so that this indication is displayed when the Normal
mode is selected by the Normal/Selective function (see
Section 5.5.2).
- The lines above the zone and channel displays
indicate which display is changed if the Select switch
is turned. To switch between displays, press the Select
switch (see Section 3.4.2).
12
CONTROLS AND DISPLAY