Press ENT and use
Run Continuous. The figure below shows Run Continuous.
Press ESC, ENT,
to select Erase & Copy as the following figure shows. Erase &
Copy is to erase and write repeatedly. It is only for CD rewriteable disks.
Press ENT and use
Run Continuous. The figure below shows Run Continuous.
5.12.7 Update Firmware
On the above figure press ESC and
is to update firmware to the latest version. But you should get the version first.
to select the time of simulation such as 1, 2, 3...1000 or
Sel burn-in num:
Run Continuous
Burn-in
Erase&Copy
to select the time of simulation such as 1, 2, 3...1000 or
Sel burn-in num:
Run Continuous
to enter the following figure. Update Firmware
12-07. Adv Setup
Update Firmware
59
ARS-2030L/2032 Manual