Burn-In - Acard ARS-2030L User Manual

ARS-2030L/2032 Manual
Press ENT to enter the next figure. Use
Press ENT to verify. After verification LCD will show the result as follows.

5.12.6 Burn-in

On the above figure press ESC and
simulate the copying progress many times. The time can be from 1 to 1000. After
each cycle of simulation, the CDs on the CD writers will eject automatically and
recede for the next bout of simulation.
Press ENT to enter the next figure. Test is simply a simulation.
to confirm Disk or Parti.
Verify Disk or
Partition? Disk
Verify Hard Disk
OK!
to enter the following figure. Burn-in is to
12-06. Adv Setup
Burn-in
Burn-in
Test
58