Select Image; Select Src Drive - Acard ARS-2030L User Manual

5.9.5 Select Image

This function is to select a partition in the hard disk. First, select the function by
pressing .
After installing a hard disk, your copy smart plus will format it automatically. Each
partition occupies 1GB. The number of partitions is dependent on the hard disk's
capacity. The partitions are alphabetically arranged. Select a partition by pressing
, and LCD will show the message as follows.
After the partition is selected, LCD will show the result as follows.

5.9.6 Select Src Drive

This function is to select CD-ROM or any CD writer as the source from which you
can load data into a particular partition as an image file.
9-05.Image P: A
Select Image
Select Partition
A: DATA 627MB
Set Partition to
A
31
ARS-2030L/2032 Manual