1. Manuals
  2. Brands
  3. Acard Manuals
  4. Disc Duplicator
  5. AEC-7763LC
  6. User manual

Acard AEC-7763LC User Manual

Glyph aec-7763lc dvd duplicator: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Acard AEC-7763LC

Summary of Contents for Acard AEC-7763LC

  • Page 5: Chapter 1 Introduction

    The four models AEC-7763LC, AEC-7763LD, ARS-2022, and ARS-2022D are some- what different in mechanical design, but have the same functions of duplication. AEC-7763LC and ARS-2022 are simply for copying CD in video, audio or data form while AEC-7763LD and ARS-2022D for copying CD and DVD. They all have multi- functional LCDs and 4 simple buttons on the panels.

  • Page 6: Chapter 2 Installation

    AEC-7763LC/LD & ARS-2022/2022D Chapter 2 Installation From this chapter on we only take ARS-2022D as an example to explain. The hard- ware connection of ARS-2022D can be with or without a hard drive. Hardware Connection of ARS-2022D with a HDD The hard drive must be connected to port CN2 and in Master mode.

  • Page 7: Chapter 3 Basic Instructions

    AEC-7763LC/LD & ARS-2022/2022D Chapter 3 Basic Instructions 3.1 Buttons and LCD There are four buttons and an LCD on the panel of ARS-2022D. They are described as follows. 1. It shows all functions and messages. 2. It is used to scroll up functions or menus.

  • Page 8: About Hdd Installation

    AEC-7763LC/LD & ARS-2022/2022D There are 12 functions for you to use. Function 1 is Copy. You can press to see other functions. 3.2 About HDD Installation With a 3.5” hard drive you can use and enjoy the function of Image. In other words, you have one more choice to duplicate a CD or DVD from an image file stored in the hard drive.
  • Page 9 AEC-7763LC/LD & ARS-2022/2022D 3.2.2 Without a HDD If you don’t install a 3.5” hard drive to ARS-2022D, the operation procedures will be as follows. Place a source DVD into DVD-ROM. Switch to function 1 Copy by pressing Place a blank DVD disk into the DVD writer, and press ENT to start copying.

  • Page 10: Chapter 4 Board Layout

    AEC-7763LC/LD & ARS-2022/2022D Chapter 4 Board Layout The board layout of ARS-2022D is shown as follows. ACARD...

  • Page 11: Chapter 5 Functions

    AEC-7763LC/LD & ARS-2022/2022D Chapter 5 Functions There are 12 functions: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Select Source, Image, Edit Track, Setup and Advanced Setup. Among the 12 functions, Edit Track is designed exclusively for editing a collection of favorite songs from CDs.
  • Page 12 AEC-7763LC/LD & ARS-2022/2022D When copying comes to an end, LCD will show the results as follows. The passed DVD will eject automatically. 1.Copy OK: 01 5.2 Test Function 2 Test is to simulate the copying progress. When simulation finishes, there will be no data really written into the DVD disk.
  • Page 13 AEC-7763LC/LD & ARS-2022/2022D When the test comes to an end, LCD will show the results as follows. 2.Test OK: 01 Stopping the test halfway does not affect the DVD disk, but if the DVD rewriteable disk contains important data, they may be destroyed.
  • Page 14 AEC-7763LC/LD & ARS-2022/2022D When the whole process finishes, LCD will show the results as follows. 3.Test & Copy OK: 01 5.4 Verify Function 4 Verify is to examine if the target DVD can be read correctly after copying. Select function 4.
  • Page 15 AEC-7763LC/LD & ARS-2022/2022D Select function 5. Put the source DVD onto DVD-ROM and the target DVD onto DVD writer. 5.Compare Press ENT to compare. LCD will show the comparison information as follows. Compare- DVD 0% 4213.4MB 15:00 When comparison comes to an end, LCD will show the results as follows.
  • Page 16 AEC-7763LC/LD & ARS-2022/2022D If comparison fails, LCD will show the failure. By pressing ENT twice, LCD will show that the contents of source 1 and those of source 2 do not match as follows. Src: 02 DVD-RW TOC not match 5.6 Prescan...

  • Page 17: Disc Info

    AEC-7763LC/LD & ARS-2022/2022D 5.7 Disc Info Function 7 Disc Info is to show the basic information of source DVD. Select function 7. Put the source DVD onto DVD-ROM. 7.Disc Info Press ENT, and LCD will show the DVD information as follows.
  • Page 18 AEC-7763LC/LD & ARS-2022/2022D After selecting the source such as DVD-ROM, you can press ENT, and LCD will show the message as follows. DVD-ROM selected! Suppose you select HDD as the source and try to copy from one of its partitions, but the partition contains no data, an error message will appear on LCD.

  • Page 19: Delete Image

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to load. LCD will show the loading information as follows. Load- A - DVD 0% 4213.4MB 15:00 After the image file is successfully loaded, LCD will show the results as follows. Image load OK If there is an image file existing in the current partition, the system will ask you to confirm Yes or No.
  • Page 20 AEC-7763LC/LD & ARS-2022/2022D After the image file is deleted, LCD will show the results as follows. Partition A: Image is deleted 5.9.3 Image Info This function is to show the basic information of an image file stored in a particular partition.
  • Page 21 AEC-7763LC/LD & ARS-2022/2022D Press ENT, and LCD will show the comparison information as follows. Compare- DVD 0% 4213.4MB 15:00 When comparison comes to an end, LCD will show the results as follows. Compare OK: 1 Fail: 0 Diff: 0 Press ENT to see the details of source 1 as shown below.

  • Page 22: Select Image

    AEC-7763LC/LD & ARS-2022/2022D 5.9.5 Select Image This function is to select an image file from a certain partition in the hard drive. First, select the function by pressing 9-05.Image P: A Select Image After installing a hard drive, ARS-2022D will format it automatically. Each partition occupies 5GB.
  • Page 23 AEC-7763LC/LD & ARS-2022/2022D First, select the function by pressing 9-06. Image P: A Image Src Drive Then, use to select DVD-ROM or DVD writer as the source. Select Img Src: 01 IDE1 DVD-ROM After selecting the source such as DVD-ROM, you can press ENT, and LCD will show the message as follows.

  • Page 24: Edit Track

    AEC-7763LC/LD & ARS-2022/2022D Select function 10. 10. Edit Track 5.10.1 CD to CD On the above figure press ENT, and you will enter the following figure.Here the function CD to CD is to let you select a track or more from CD-ROM, and then copy into a blank CD-R/RW.
  • Page 25 AEC-7763LC/LD & ARS-2022/2022D After selecting, please use to move to the “End” menu as shown below. Select Track: End 1Trk03:25 Press ENT to finish the CD editing, and use to confirm Yes or No. End edit disc and burn?Yes LCD will show the copying information as follows.
  • Page 26 AEC-7763LC/LD & ARS-2022/2022D If you want to keep editing, the current source CD will eject auctomatically, and the system will ask you to insert another new CD as shown below. Insert next disc After inserting the new CD, press ENT to edit as before. Suppose we decide to select the second track, then press ENT.
  • Page 27 AEC-7763LC/LD & ARS-2022/2022D On the above figure 2/2 means the second track of all tracks we have selected, and so far we have selected two tracks from two different CDs. When copying comes to an end, LCD will show the message as follows.

  • Page 28: Cd To Hdd

    AEC-7763LC/LD & ARS-2022/2022D 5.10.2 CD to HDD After closing sessions, press ESC and to enter the following figure.Here the function CD to HDD is to let you select a track or more from CD-ROM, and then copy into a certain partition of HDD.
  • Page 29 AEC-7763LC/LD & ARS-2022/2022D Press ENT to finish the CD editing, and use to confirm Yes or No. End edit disc and burn?Yes Then, the track as an image file will be loaded into HDD. LCD will show the loading information as follows.
  • Page 30 AEC-7763LC/LD & ARS-2022/2022D After inserting the new CD, press ENT to edit as before. Suppose we select the second track, then press ENT. A “+” will appear beside 2/10 as shown below. Select Track: +2/10 04:25 After selecting, please use to move to the “End”...
  • Page 31 AEC-7763LC/LD & ARS-2022/2022D The system will ask if you want to keep editing. This time please use to confirm No as shown below. Continue edit next Disc?No Then, the system will ask if you want to burn from HDD into CD-R/RW or move into a partition.
  • Page 32 AEC-7763LC/LD & ARS-2022/2022D After pressing , you need to select a partition into which the data will be moved. Suppose we select A as shown below. Select Partition After pressing ENT, LCD will show the moving information as follows. Moving to P: A When moving finishes, LCD will show the results as follows.

  • Page 33: Play Audio Track

    AEC-7763LC/LD & ARS-2022/2022D When moving finishes, LCD will show the results as follows. Moving to P: A 5.10.3 Play Audio Track This function is to make ARS-2022D act as a music player. You can plug an AV terminal in the audio port on the back of the device, and enjoy the music.
  • Page 34 AEC-7763LC/LD & ARS-2022/2022D On the above figure press ESC and to select the function. 10-04. Edit Track Close Session After pressing ENT, the system will ask if you are sure to close. Close all disc’s session? Yes After pressing ENT, LCD will show the message as follows.

  • Page 35: Cd Burn Speed

    AEC-7763LC/LD & ARS-2022/2022D Select function 11. 11. Setup 5.11.1 Language On the above figure press ENT, and you will enter the following figure. The function Language lets you select a language in which messages can be shown on LCD. 11-01. Setup Language Press ENT to enter the following figure.
  • Page 36 AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is auto. CD Burn Speed Auto 5.11.3 DVD Burn Speed On the above figure press ESC and to enter the following figure. The function DVD Burn Speed lets you control the burning speed of DVD writer.

  • Page 37: Read Speed

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is maximum, but there are still other choices: 32X, 16X and 8X. Read Speed Maximum 5.11.5 Auto Start Drive On the above figure press ESC and to enter the following figure. Auto Start Drive is to copy or test automatically once you put a blank DVD onto the writer.

  • Page 38: Startup Menu

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is Copy. Of course you can select any other function as the first item, but remember to press ENT. Startup Menu 1.Copy 5.11.7 Auto Verify On the above figure press ESC and to enter the following figure.

  • Page 39: Auto Prescan

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is Off. Press to select On. Auto Compare 5.11.9 Auto Prescan On the above figure press ESC and to enter the following figure. Auto Prescan is to scan automatically if the source DVD can be read correctly, and by the way to test the reading speed.

  • Page 40: Burn On The Fly

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is Eject Good Only. Press select Eject All Disc or Do Not Eject. Eject Disc Eject Good Only 5.11.11 Burn On The Fly On the above figure press ESC and to enter the following figure.

  • Page 41: Burn Mode

    AEC-7763LC/LD & ARS-2022/2022D 5.11.12 Burn Mode On the above figure press ESC to return to Function 11, and then select part 12 Burn Mode as the following figure shows. Burn Mode lets you control the burning modes. There are two modes: DAO (Disc At Once) and TAO (Track At Once). They support CD only.

  • Page 42: Device Info

    AEC-7763LC/LD & ARS-2022/2022D 5.11.14 Device Info On the above figure press ESC and to enter the following figure. Device Info shows the basic information of the DVD-ROM and DVD writer you have installed. 11-14. Setup Device Info Press ENT to enter the next figure.

  • Page 43: System Info

    AEC-7763LC/LD & ARS-2022/2022D 5.11.15 System Info On the above figure press ESC and to enter the following figure. System Info shows the information of the system. 11-15. Setup System Info Press ENT to enter the next figure. Duplicator ver: 1.54L Press ENT to enter the next figure.
  • Page 44 AEC-7763LC/LD & ARS-2022/2022D After confirming Yes and pressing ENT, LCD will show the message as follows. Erasing disc 00:00 (Quick) When erasing finishes, LCD will show the results as follows. Quick Erase OK:01 Fail:00 5.11.17 Full Erase On the above figure press ESC and to enter the following figure.

  • Page 45: Adv Setup

    AEC-7763LC/LD & ARS-2022/2022D When erasing finishes, LCD will show the results as follows. Full Erase OK:01 Fail:00 5.12 Adv Setup Function 12 Adv Setup lets you change the system configuration. This function includes 12 parts. They are UnderRun Protect, Overburn, Read Error Skip, Format HDD, Verify HDD, Burn-in, Update Firmware, Compare Firmware, H/W Diagnostic, Load Default, CD+G, and ISRC.

  • Page 46: Underrun Protect

    AEC-7763LC/LD & ARS-2022/2022D UnderRun Protect lets you control On and Off of Buffer Under Run Protection such as Burn Proof, SafeBurn, JustLink, Seamless Link, etc. Press ENT to enter the following figure. The default is On. Press to select Off.

  • Page 47: Format Hdd

    AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the following figure. The default is Off. Press to select On. Read Error Skip 5.12.4 Format HDD On the above figure press ESC and to enter the next figure. Format HDD is to partition the hard drive.
  • Page 48 AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the next figure. Use to confirm Disk or Parti. Verify Disk or Partition? Disk Press ENT to verify. After verification LCD will show the results as follows. Verify Hard Disk 5.12.6 Burn-in On the above figure press ESC and to enter the following figure.

  • Page 49: Update Firmware

    AEC-7763LC/LD & ARS-2022/2022D Press ESC, ENT, to select Erase & Copy as the following figure shows. Erase & Copy is to erase and write repeatedly. It is only for DVD rewriteable disk. Burn-in Erase&Copy Press ENT and use to select the time of simulation such as 1, 2, 3...1000 or Run Continuous.

  • Page 50: Compare Firmware

    AEC-7763LC/LD & ARS-2022/2022D 5.12.8 Compare Firmware On the above figure press ESC and to enter the following figure.Compare Firmware is to compare the current firmware version and the newly downloaded version. It can prove if the downloaded version is the newest one.

  • Page 51: Load Default

    AEC-7763LC/LD & ARS-2022/2022D 5.12.10 Load Default On the above figure press ESC and to enter the next figure. Load Default is to make all changed settings recover to defaults. 12-10. Adv Setup Load Default Press ENT to enter the next figure. Use to confirm Yes or No.
  • Page 52 AEC-7763LC/LD & ARS-2022/2022D Press ENT to enter the next figure. The default is Off. Press to select On. CD+G 5.12.12 ISRC & MCN On the above figure press ESC and to enter the following figure. ISRC and MCN are special copying formats. This function supports them.

  • Page 53: Chapter 6 Troubleshooting

    AEC-7763LC/LD & ARS-2022/2022D Chapter 6 Troubleshooting 6.1 About LCD After powering on if there is no LCD, please check if the connection of power cord is frim and the environment of power outlet is normal. 6.2 About Error Messages During Copy, Test, Compare and Verify, etc. if you press ESC to abort, an error message will appear on LCD.

  • Page 54: About Buttons

    AEC-7763LC/LD & ARS-2022/2022D 6.4 About Buttons If you press any one of the four buttons on the panel, but there is no response, it is perhaps that the button cannot function well. Please inspect the jumper setting. 6.5 About DVD Writer Not Readable After copying if the DVD writer is unreadable, please use Compare to examine, or get another DVD-ROM to test.

  • Page 55: About Function 12 And Cancellation

    AEC-7763LC/LD & ARS-2022/2022D 6.8 About Function 12 and Cancellation If you want to execute function 12 Advanced Setup, you can press ESC for 2 seconds. And during operation if you want to cancel a function like Copy, Test, Verify and so...

  • Page 56: Appendix 1 List Of Functions

    AEC-7763LC/LD & ARS-2022/2022D Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify Compare 6 Prescan 7 Disc Info 8 Select Source 9 Image (It works only when a hard disk is connected) 9.1 Load 9.2 Delete Image...

  • Page 57: Table Of Contents

    AEC-7763LC/LD & ARS-2022/2022D 11.11 Burn On The Fly (Default is On) 11.12 Burn Mode (Default is DAO) 11.13 Button Sound (Default is On) 11.14 Device Info 11.15 System Info 11.16 Quick Erase 11.17 Full Erase Adv Setup 12.1 UnderRun Protect (Default is On) 12.2 Overburn (Default is Off)

  • Page 58: Appendix 2 Lcd Messages

    AEC-7763LC/LD & ARS-2022/2022D Appendix 2 LCD Messages 1. Normal Conditions: Initialize SDRAM..........Initialize the memory of the system. Detect Drives......Detect what drives are connected with the system. User Abort!.............Cancel the job during operation. Analyzing................Analyze the source disc. Source Drive Not Ready........Source drive is not ready to read.
  • Page 59 AEC-7763LC/LD & ARS-2022/2022D Press a Key to Eject Good Disc... Press any ket to eject the good disc after copying Press a Key to Eject Fail Disc..Press any key to eject the failed disc after copying. DVD-RW does not Support the Func..DVD-RW doesn’t support this function.
  • Page 60 AEC-7763LC/LD & ARS-2022/2022D Verify Hard Disk OK!........The hard disk is verified successfully. Verify Hard Disk Fail!......The hard disk is not verified successfully. Verify Partition Header!..........Verify the partition header. Select HD First!..........Select a formatted hard disk at first.
  • Page 61 AEC-7763LC/LD & ARS-2022/2022D Update F/W xxx to yyy?..Do you want to update the firmware version from xxx to yyy? Searching F/W ........The system is searching for a valid firmware. Check Sum Error!..........The udpated firmware has errors. Source can’t be Hard Disk!..During comparison the source cannot be hard disk.
  • Page 62 AEC-7763LC/LD & ARS-2022/2022D Technical Support Form Email: support@acard.com http://www.acard.com Model F/W Version AEC-7763LC/7763LD ARS-2022/2022D Channel Model F/W Version DVD-ROM DVD Writer Hard Disk Model/type Capacity Firmware version Others Problem Description MAL20227763E10-0...

This manual is also suitable for:

Ars-2022Aec-7763ldArs-2022d

Table of Contents