Burn Mode - Acard ARS-2030L User Manual

ARS-2030L/2032 Manual
Press ENT to enter the following figure. The default is On. Press
If your copy smart plus doesn't connect with a hard disk, LCD will show the message
as follows.

5.11.11 Burn Mode

On the above figure press ESC to return to Function 10, and then select part 11 Burn
Mode as the following figure shows. Burn Mode lets you control the burning modes.
There are two modes: DAO (Disc At Once) and TAO (Track At Once). If the CD
writer doesn't support the mode you have selected, the copy smart plus will
automatically switch to another mode.
Press ENT to enter the next figure. The default is DAO. Press
Burn On The Fly
On
No Valid HDD !
11-11. Setup
Burn Mode
Burn Mode
DAO
50
to select Off.
to select TAO.