Eject Disc; Burn On The Fly - Acard ARS-2030L User Manual

5.11.9 Eject Disc

On the above figure press ESC and
provides three choices. They are Eject Good Only, Eject All Disc, and Do Not Eject.
Eject Good Only means that the CDs will eject automatically only when they are
copied successfully. Eject All Disc means that the CDs will eject automatically
whether they are copied successfully or not. Do Not Eject means that you need to
eject the CDs manually when copying finishes.
Press ENT to enter the following figure. The default is Eject Good Only. Press
select Eject All Disc or Do Not Eject.

5.11.10 Burn On The Fly

On the above figure press ESC and
Fly lets you control the copying methods. When the setting is On, the data will be
copied directly from the source CD to the target CDs. When the setting is Off, the
data will be loaded into a partition of HDD first, and hence copying will be done.
to enter the following figure. Eject Disc
11-9. Setup
Eject Disc
Eject Disc
Eject Good Only
to enter the following figure. Burn On The
11-10. Setup
Burn On The Fly
49
ARS-2030L/2032 Manual
to