When burning finishes, LCD will show the result as follows.
On the above figure press ESC to enter the following figure. Now press
the data from HDD template into a certain partition.
After pressing
, you need to select a partition into which the data will be moved.
Suppose we select A as shown below.
After pressing ENT, LCD will show the moving information as follows.
When moving finishes, LCD will show the result as follows.
Burn Complete !
OK: 03
Burn or Move to
partition? Move
Select Partition
A
Moving to P: A
0%
Moving to P: A
OK!
41
ARS-2030L/2032 Manual
to move