Installation Instructions - Westinghouse GHP16S User Manual

iNSTALLATiON iNSTRUCTiONS

nce must be installed by an authorised person
This applia
and in compliance with :
1. AS 5601 'Gas Installations' (Australia) or NZS 5261
'Installation of Gas Burning Appliances and Equipment'
(New Zealand) or the relevant installation code for
gas appliances of your country.
2. The local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
3. The particular instructions as given below.
Figure 4–60cm and 75cm models cut-out
Gas supply connection location
Figure 4–90cm models cut-out
Gas supply connection location
Cooktops are supplied for use with natural gas (NG).
To use on LPG the injectors MUST be changed using
the conversion kit supplied. Refer LP Conversion on
page 12.
4. A certificate of compliance MUST be given to the
5. This appliance must be earthed.
560mm
830mm
iNSTALLATiON
CAUTION
customer after the appliance is successfully installed.
*
480mm
*
480mm
7