How To Use The Elliptical Exerciser - Pro-Form 820 Pr Elliptical User Manual

12. Make sure that the Power Cord (not shown) is fully
inserted into the Power Receptical (114).
13. Make sure that all parts of the elliptical exerciser
are properly tightened. Note: Some hardware may
be left over after assembly is completed. To protect
the floor or carpet from damage, place a mat under
the elliptical exerciser.

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of
electric shock. This product is equipped with a cord
having an equipment-earthing conductor and an earth-
ing plug. If the power cord is damaged, it must be
replaced with a manufacturer-recommended
power cord.
Two power
1
cords are
included. Select
the one that will
fit your outlet.
Refer to drawing
1, and plug the
indicated end of
the power cord
into the socket at
the back of the 2
elliptical exerciser.
Refer to drawing
2. Plug the power
cord into an
appropriate outlet
that is properly
installed and
earthed in accor-
dance with all local codes and ordinances. Note: In
Italy, an adaptor (not included) must be used
between the power cord and the outlet. Important:
The elliptical exerciser is not compatible with
GFCI-equipped outlets.
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product is
Socket on
properly earthed. Do not modify the plug pro-
Elliptical
vided with the product—if it will not fit the out-
Exerciser
let, have a proper outlet installed by a quali-
fied electrician.
Note: When the power cord is plugged in, the ellip-
tical exerciser's incline system may automatically
calibrate itself. During the calibration process, two
dashes (– –) will appear in the main display of the
Outlet
console, and the ramp will move to the highest
position and then return to the lowest position.
The calibration process will last for one to two
minutes.
9
12
DANGER:
Improper connection of
UK
114
FR/SP
UK