Maintenance And Troubleshooting - Pro-Form 820 Pr Elliptical User Manual

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
For smooth opera-
tion of the elliptical
exerciser, clean the
ramp regularly
using a soft cloth
and a small amount
of mild detergent.
Other parts of the
elliptical exerciser
can be cleaned in
the same way. Keep
liquids away from the console. Never use abra-
sives or solvents.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of
the elliptical
exerciser, hold
the handlebars
firmly, and place
one foot against
the ramp in the
location shown.
Pull the handle-
bars until the
elliptical exercis-
er can be moved
on the front
wheels, and
carefully move
the elliptical
exerciser to the
desired location.
Then, place one
foot against the ramp and lower the elliptical exercis-
er. Due to the size and weight of the elliptical exer-
ciser, use extreme caution while moving and low-
ering it.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
After the elliptical
exerciser has been
moved, make sure
that the ends of
both stabilizers are
touching the floor. If
the elliptical exercis-
er rocks slightly on
your floor during
Ramp
use, turn one or
both of the leveling
feet under the front stabilizer until the rocking motion
is eliminated.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
If there are sheets of clear plastic on the metal con-
tacts on the handgrip pulse sensor, peel off the plas-
tic. For optimal performance of the handgrip pulse
sensor, keep the metal contacts clean using a soft
cloth and a small amount of mild detergent. Never
use alcohol, abrasives, or chemicals.
Avoid moving your hands or squeezing the handgrip
Place your
pulse sensor too tightly. Excessive movement or pres-
foot here
sure may interfere with heart rate readings. For the
most accurate heart rate reading, hold the metal con-
tacts for about 30 seconds.
Wheel
21
Leveling Foot