System Overview; Remote Control - Go-Video DHT7000 User Manual

:: System Overview

Remote Control

1 DISPLAY Press to display disc information during playback. Press
once for elapsed/remaining time, twice for detailed disc information, and
three times to turn off the display.
2 POWER Press to switch between power on and Standby mode.
3 0-9
Use to key in numbers; e.g., chapter/track numbers in Go To mode.
4 CLEAR Press to clear Program Play.
5 PROGRAM Press to set up Program Play (custom playback order).
6 A-B Press to repeat a segment between two points (A and B).
7 REPEAT Press to repeat all or individual chapters/tracks.
8 MUTE
Press to toggle mute on/off to mute all audio output, including
amplified output and downmixed channels.
9 VOLUME +/-
Press to adjust the volume/speaker level.
10 SETUP While the disc is stopped, press to display the Setup menu for
the DVD system. While a disc is playing, press to adjust brightness and
edges; see page 29.
11 ENTER Press to confirm menu settings.
12 TITLE Press to display DVD title menus (for discs with multiple titles
only).
13 PLAY
Press to start playback.
14 STOP Press to stop and hold playback (press PLAY to resume). Press
STOP twice to stop playback and reset playback to the beginning.
15 TUNING-/SCAN BACKWARD
tune down the frequency spectrum. In the DVD function, press repeat-
edly to scan backward at 2x, 4x, 8x or 20x normal speed.
16 TUNING+/SCAN FORWARD
tune up the frequency spectrum. In the DVD function, press repeatedly
to scan forward at 2x, 4x, 8x or 20x normal speed.
17 AM/FM Press to enter the Tuner function and switch between the AM
and FM bands.
18 ST/MONO
Press to set the Tuner audio to Stereo or Mono.
2
In the Tuner function, press to
AA
In the Tuner function, press to
""