Table of Contents
Advertisement
:: VCD Playback
Playing VCDs
VCDs with PBC (Playback Control) allow you to navigate VCD disc menus and select individual tracks for playback.
1
Insert a VCD with PBC and press PLAY.
2
As playback starts, the PBC menu appears on the screen.
•
VCD 1.1 does not support PBC functions.
3
Use the arrow keys or the 0-9 key to select the desired track number.
4
Press ENTER to confirm your selection.
5
Follow the instructions in the PBC menu or supplied with the disc for special interactive features.
•
Features vary from disc to disc.
6
To return to the PBC menu during playback, press the RETURN button.
• The PBC function can be switched off by pressing the DISC
MENU button on the remote control. This button toggles PBC
on and off during VCD playback.
• If the PBC status is changed from off to on, playback might
restart from the beginning of the VCD disc.
• When the PBC function is switched off, the RETURN button
will not work. Depending on the structure of the VCD, the SKIP
FORWARD/BACKWARD buttons may not work either.
Sound
The SOUND button on the remote control offers five preset EQ settings for use during VCD or CD audio playback.
1
Press SOUND to view the current EQ setting during VCD or CD audio playback:
2
Continue to press SOUND to change the EQ to FLAT, POP, ROCK, JAZZ or CLASSIC.
L/R Button
The L/R (Left channel/Right channel) button on the remote control allows you to manually set the Audio Output of
VCD/CDDA discs.
1
Before you begin, CD/VCD must be set to 2 Channel in the Setup/Audio menu; see page 16.
2
Press L/R to view the current L/R audio setting.
30
Advertisement
Table of Contents
